Compact Pressurized Flat Pannel Solar Water Heater (QR-FL02)

Characteristic:
This system can endure high pressure up to 0.62Mpa. Stable performance and long service life. Ultrosonic welding ensures the quick conduction from the thermal heat to the risers. It can endure high temperature without leakage. Its operation temperation: -35--120 degree centigrade. Patterned temper glass or low iron temper glass is not easy to be broken even under very high transmission. Low emission black chrome or magnetic blue sputtering coating has higher absorption rate.

Specification:
Flat panel solar collector:
1. Collector core board all copper chrome black of core board
2. Glass cover: Toughened glass; Aluminousness 87%
3. Heating preservation: 25mm excellent glass Thinsulate +20mm high ensity glass Thinsulate
4. frame: Aluminium alloy, height can choose 80mm
5. Optical performance: Absorption rate « 95 emission rate« 5%6. Capacity: 100L, 150L, 200L, 250L, 300L, 400L, 500L

Working principle:
The collector absorbs solar energy and transmits it to the water tank through circulation. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically. The circulation pump makes heat-conducting liquid circulate automatically.
Then the heat-conducting liquid transfers heat to water by heat exchanger in the tank to heat the water

Technicial data:
1, Inner Tank: Stainless Steel SUS3042B 1.5mm thickness, welding by argon protection
2, Out Shell: Galvanized Steel coated a anticorrosion layer(white color)
3, frame: Galvanized Steel coated a anticorrosion layer, thickness 1.5mm
4, 1500w automatic Electrical Heater include
5, 6.0 bar Relief Valve include
6, Cold in: 1/2 inch male
7, Hot out: 1/2 inch male
8, Circulate In/Out: 3/4 inch male
9, Install angle: 38-45 degree